I've been trying to add a graphical client monitoring feature into the Tomato GUI for several weeks. Support for additional router models, dual-band and Wireless-N mode.
#Tomato router download driver#
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates Tomato Firmware v MIPSR2-Toastman-Clientmon-Beta K26 Std flash ofw image one more time using tftp client after flash router wuill brick and power led will blink green light upgrade router via GUI will brick router!!
Dont panic :) Just make reboot one more time ģ) after flash leave router for 5-7 minutes until ping 192.168.1.1 will returnĤ) log into Tomato and first of all erase nvram!!ĥ) after erase 2nd radio will disapear. Original WNDR3400 firmware image for recovery. If password will be incorect, then just Restore default settings using Reset button. after few minutes you should be able to log in to OFW GUI re-send OFW chk file only more time via TFTP Client (make sure you have static ip 192.168.1.2/255.255.255.0) after few minutes look on Power Led â? should slowky blink on GREEN color upgrade router via GUI using OFW chk file after few minutes press F5 (refresh) and you should be able to see Tomato GUI
run OFW, select upgrade firmware and select this file: Buttons should works correct (reset buttons and WPS only) tomato works and all features works including USB port
#Tomato router download serial#
Make sure you have serial cable to debrick router!! BE WARNED! This is highly beta tomato version.
0 kommentar(er)
